Polypropylene foam filter, removes particles above 5 micron grain size.
The cartridge is designed for standard filter housing size 10''.
Mainly used in reverse osmosis systems, nanofiltration and other domestic water filters.
The cartridge have a strong absorption ability. Its structure is foam-like, with a lot of open-cell micro-bubbles on the surface.
The cartridges are designed to purify cold drinking water and all-purpose water. They should not be used on micro-biologically contaminated water, or on water from an unknown source. The cartridges are manufactured in the EU.
Advantages of the cartridges:
- Produced in the EU
- Remove solids (rust, sand, silt, suspension)
- Commonly used as the first filtration stage in filtration of drinking and all-purpose water*
- Ensure precise filtration at low pressure drop
- Resistant to chemicals
- Resistant to microbial growth
Height: 9 7/8'' (25 cm)
Diameter: 2 1/2'' (6.5 cm)
Operating temperature: 2 - 60°C
Recommended flow rate: up to 10 l/min
Cartridge life: up to 6 months (depending on water quality)
Minimum pressure drop at high flow rate.
Triq Ruggero Loria
VAT: MT 25259933
Mobile :+356 99806329
E-Mail : firstname.lastname@example.org