RO PAD 300 GPD TANKLESS WITH LCD PANEL CONTROL, BOOSTER PUMP

PRODUCT SPECIFICATIONS

RO Pad is a revolutionary water treatment system designed to be the smallest yet the most efficient unit for drinking water filtration. Due to its compact size and the fact, that it can be used in any position, it's a perfect solution for those with tiny kitchens. The unit can be placed even on the floor, under the kitchen furniture.
There is no need for storage tank—pure water is produced directly, right when you turn on the tap.
With high performance booster pump its work is extremely reliable and efficient.
Advanced electronics control water treatment process, render membrane cleaning and show operation parameters on a colour display.

Water treatment stages:
1. Pre-filtration PP foam cartridge—sediments removal
2. Carbon block cartridge—chemicals removal
3, 4. Reverse osmosis membranes

RO Pad produces water of uniquely high purity, removes all contaminations directly to the drainage.
It allows you to drink water right from the tap—no boiling needed!

Performance:

Actual water production is 1.1 litres per minute—just as from a pressure tank of regular RO systems. The difference is, RO Pad produces water directly, right when you turn on the spout valve. There is no need for pressure tank. Another distinguish advantage of this system is extremely low reject stream—regular RO systems reject about 6 litres of concentrate for every 1 litre of product water. But! RO Pad produces 1.1 l of clean water, while rejecting only 0.6 l of concentrate over that time.

Operational Costs:

At this system there are in-line cartridges with compact 2,5" housings. It helps regular replacement to be quick and easy. Operational costs of RO Pad are really low: Set of cartridges  should be replaced every 6 months.

If you're looking for modern, small size, economy unit with high performance, RO Pad is a category killer!

Specification:


Water Inlet Connection: 1/2"
Drainage Outlet Connection: 1/4"
Power Source: 230V/60Hz
Operational Power Consumption: 96 W
Membranes Cleaning: Automatic
Inlet Water Temperature: 5-45°C
Inlet Water Pressure: 21.7-43.5 PSI (1.5-3.0 bar)
Spout: Chrom-pleated, model GW-W1-02-CH
For proper operation this unit needs to be connected to drainage and 230V power source.
All you need for system installation is in the installation kit.
Connection Type: Quick-fits connectors secured with clips.
Device Test:

This device is shipped with full certainty of its proper work.
Once you have placed your order, the unit will be connected and tested, to leave you as little work to do as possible. We check the tightness of connections, performance, test all components, etc. You will get a fully functional system that only needs plumbing and electrical connections. It is recommended to install the device within 7 days from the delivery date.

Device Installation:

All the equipment in the shop can be installed on your own. However, if you would like to order our installation services—we are at your disposal. Available only within the territory of Malta and Gozo.

Technical Support:

Each product has a user's manual. We provide technical support during assembly and maintenance of the device.

Warranty:

2-year warranty